Unknown Properties of Aluminum Nano-Layer in Unglue Assemblage of ZERODUR Parts

Volodymyr Maslov

doi:doi:10.11648/j.nano.20130103.12

| Peer-Reviewed

Unknown Properties of Aluminum Nano-Layer in Unglue Assemblage of ZERODUR Parts

Volodymyr Maslov

Published in American Journal of Nanoscience and Nanotechnology (Volume 1, Issue 3)

Received: 15 July 2013 Published: 30 August 2013

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

In the course of technological operations and the following running, the aluminum nanolayer providing reliable unglue bonding the ZERODUR parts demonstrates a complex of previously unknown properties: - compensation of small geometrical deviations in joined parts, due to aluminum plasticity the requirements to geometry of joined parts can be lowered from Ν = 0.5, ΔΝ = 0.1 (where Ν is the deviation of surface geometry from standard expressed in the Newton interferential rings, ΔΝ – local error or deviation of the type “well” or “nib”), which are necessary for joining, if one applies the methods of optical contact or deep optical contact, to Ν = 2-5, ΔΝ = 1; - Chemical interaction with polished ZERODUR surface at relatively low temperatures (400 to 600ºС); - Minimum level of internal mechanical strains in joined parts; - Properties of elastically-brittle durable material. Using the above generalization of the obtained results, we have offered new technological schemes for production of ZERODUR parts with a complex shape.

Published in	American Journal of Nanoscience and Nanotechnology (Volume 1, Issue 3)
DOI	10.11648/j.nano.20130103.12
Page(s)	70-73
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2013. Published by Science Publishing Group

Keywords

Aluminum Nano-Layer, Unglue Bonding, ZERODUR

References

[1]	G Hyun-Ju Cho1, Jae-Cheul Lee, and Sang-Hyun Lee, "Design and Development of an Ultralow Optical Loss Mirror Coating for Zerodur Substrate", Journal of the Optical Society of Korea, vol. 16, No. 1, March 2012, pp. 80-84
[2]	Martin J., Rowan S., "Influence of Temperature and Hydroxide Concentration on the Settling Time of Hydroxide-catalysis Bonds", Physics Letters, A. 2006; pp. 341-345.
[3]	Katie Green; Jan Burke; Bozenko Oreb, "Chemical bonding for precision optical assemblies", Opt. Eng. 50(2), 023401, February 2011.
[4]	Berezhinsky L.I., Maslov V.P., Serdega B.K., Tetyorkin V.V., Yukhymchuk V.A. "Study of chemical interaction of Al-Zerodur interface", J. Eur. Ceram. Soc., 2006, 26/16. pp. 3825-3830.
[5]	Strizhalo V.A., Dobrovolskii Yu.V., Zemtsov M.P., Maslov V.P., Rodichev Yu.M., Bodunov V.E., "A study of the fracture of glasses, pyroceramics and their nanojoints using the method of acoustic emission", vol. 39, no. 1, 2007, pp. 64-67,.
[6]	V. Maslov, Development of a technology for joining glass-ceramics parts with zero thermal expansion, Opt. Eng. vol. 47(2), 023401, February, 2008.
[7]	Maslov V.P. "The Maslov`s ceramic bonding of the glassy-crystalline units", Intl. application № PCT/ua2006/000045 (July 17, 2006).
[8]	H. E. de Bruijin, B. S. F. Altenburg, R. P. H.Kooyman, and J. Greve, "Determination of film thickness and dielectric constant of thin transparent dielectric layers using surface plasmon resonance", Opt. Commun., Vol. 82, 1991, pp. 425–430.
[9]	V.P. Maslov, "New Approach to Durability of Glassceramic and Silicate Glass", The International Journal of Material Science. V. 2, Iss.4, 2012, pp. 123-128
[10]	Maslov V.P., Rodichev Yu.M., Demaile D., Zheng Y., Lacaze E., Roditchev D. "Strength and Fracture of Nanо-Join for Glassceramics Materials", Nanorozmirni systemy: budova, vlastyvosti, tekhnologii (NANSYS-2007). International conference, November 2007, Kyiv, Ukraine. Abstracts, 2007. P. 495 (in Ukrainian).
[11]	Trefilov V.I., Milman Yu.V., Firstov S.A., Physical bases of durability of refractory metals. Kyiv, Naukova Dumka, 1975. 314 p. (in Russian).

Cite This Article

Plain Text BibTeX RIS

APA Style

Volodymyr Maslov. (2013). Unknown Properties of Aluminum Nano-Layer in Unglue Assemblage of ZERODUR Parts. American Journal of Nano Research and Applications, 1(3), 70-73. https://doi.org/10.11648/j.nano.20130103.12

Copy | Download

ACS Style

Volodymyr Maslov. Unknown Properties of Aluminum Nano-Layer in Unglue Assemblage of ZERODUR Parts. Am. J. Nano Res. Appl. 2013, 1(3), 70-73. doi: 10.11648/j.nano.20130103.12

Copy | Download

AMA Style

Volodymyr Maslov. Unknown Properties of Aluminum Nano-Layer in Unglue Assemblage of ZERODUR Parts. Am J Nano Res Appl. 2013;1(3):70-73. doi: 10.11648/j.nano.20130103.12

Copy | Download

@article{10.11648/j.nano.20130103.12,
  author = {Volodymyr Maslov},
  title = {Unknown Properties of Aluminum Nano-Layer in Unglue Assemblage of ZERODUR Parts},
  journal = {American Journal of Nano Research and Applications},
  volume = {1},
  number = {3},
  pages = {70-73},
  doi = {10.11648/j.nano.20130103.12},
  url = {https://doi.org/10.11648/j.nano.20130103.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.nano.20130103.12},
  abstract = {In the course of technological operations and the following running, the aluminum nanolayer providing reliable unglue bonding the ZERODUR parts demonstrates a complex of previously unknown properties: - compensation of small geometrical deviations in joined parts, due to aluminum plasticity the requirements to geometry of joined parts can be lowered from Ν = 0.5, ΔΝ = 0.1 (where Ν is the deviation of surface geometry from standard expressed in the Newton interferential rings, ΔΝ – local error or deviation of the type “well” or “nib”), which are necessary for joining, if one applies the methods of optical contact or deep optical contact, to Ν = 2-5, ΔΝ = 1; - Chemical interaction with polished ZERODUR surface at relatively low temperatures (400 to 600ºС); - Minimum level of internal mechanical strains in joined parts; - Properties of elastically-brittle durable material. Using the above generalization of the obtained results, we have offered new technological schemes for production of ZERODUR parts with a complex shape.},
 year = {2013}
}

Copy | Download

TY  - JOUR
T1  - Unknown Properties of Aluminum Nano-Layer in Unglue Assemblage of ZERODUR Parts
AU  - Volodymyr Maslov
Y1  - 2013/08/30
PY  - 2013
N1  - https://doi.org/10.11648/j.nano.20130103.12
DO  - 10.11648/j.nano.20130103.12
T2  - American Journal of Nano Research and Applications
JF  - American Journal of Nano Research and Applications
JO  - American Journal of Nano Research and Applications
SP  - 70
EP  - 73
PB  - Science Publishing Group
SN  - 2575-3738
UR  - https://doi.org/10.11648/j.nano.20130103.12
AB  - In the course of technological operations and the following running, the aluminum nanolayer providing reliable unglue bonding the ZERODUR parts demonstrates a complex of previously unknown properties: - compensation of small geometrical deviations in joined parts, due to aluminum plasticity the requirements to geometry of joined parts can be lowered from Ν = 0.5, ΔΝ = 0.1 (where Ν is the deviation of surface geometry from standard expressed in the Newton interferential rings, ΔΝ – local error or deviation of the type “well” or “nib”), which are necessary for joining, if one applies the methods of optical contact or deep optical contact, to Ν = 2-5, ΔΝ = 1; - Chemical interaction with polished ZERODUR surface at relatively low temperatures (400 to 600ºС); - Minimum level of internal mechanical strains in joined parts; - Properties of elastically-brittle durable material. Using the above generalization of the obtained results, we have offered new technological schemes for production of ZERODUR parts with a complex shape.
VL  - 1
IS  - 3
ER  -

Copy | Download

Author Information

Volodymyr Maslov

V. Lashkaryov Institute of Semiconductor Physics NAS of Ukraine, Kyiv, Ukraine

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Volodymyr Maslov. (2013). Unknown Properties of Aluminum Nano-Layer in Unglue Assemblage of ZERODUR Parts. American Journal of Nano Research and Applications, 1(3), 70-73. https://doi.org/10.11648/j.nano.20130103.12

Copy | Download

ACS Style

Volodymyr Maslov. Unknown Properties of Aluminum Nano-Layer in Unglue Assemblage of ZERODUR Parts. Am. J. Nano Res. Appl. 2013, 1(3), 70-73. doi: 10.11648/j.nano.20130103.12

Copy | Download

AMA Style

Volodymyr Maslov. Unknown Properties of Aluminum Nano-Layer in Unglue Assemblage of ZERODUR Parts. Am J Nano Res Appl. 2013;1(3):70-73. doi: 10.11648/j.nano.20130103.12

Copy | Download

@article{10.11648/j.nano.20130103.12,
  author = {Volodymyr Maslov},
  title = {Unknown Properties of Aluminum Nano-Layer in Unglue Assemblage of ZERODUR Parts},
  journal = {American Journal of Nano Research and Applications},
  volume = {1},
  number = {3},
  pages = {70-73},
  doi = {10.11648/j.nano.20130103.12},
  url = {https://doi.org/10.11648/j.nano.20130103.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.nano.20130103.12},
  abstract = {In the course of technological operations and the following running, the aluminum nanolayer providing reliable unglue bonding the ZERODUR parts demonstrates a complex of previously unknown properties: - compensation of small geometrical deviations in joined parts, due to aluminum plasticity the requirements to geometry of joined parts can be lowered from Ν = 0.5, ΔΝ = 0.1 (where Ν is the deviation of surface geometry from standard expressed in the Newton interferential rings, ΔΝ – local error or deviation of the type “well” or “nib”), which are necessary for joining, if one applies the methods of optical contact or deep optical contact, to Ν = 2-5, ΔΝ = 1; - Chemical interaction with polished ZERODUR surface at relatively low temperatures (400 to 600ºС); - Minimum level of internal mechanical strains in joined parts; - Properties of elastically-brittle durable material. Using the above generalization of the obtained results, we have offered new technological schemes for production of ZERODUR parts with a complex shape.},
 year = {2013}
}

Copy | Download

TY  - JOUR
T1  - Unknown Properties of Aluminum Nano-Layer in Unglue Assemblage of ZERODUR Parts
AU  - Volodymyr Maslov
Y1  - 2013/08/30
PY  - 2013
N1  - https://doi.org/10.11648/j.nano.20130103.12
DO  - 10.11648/j.nano.20130103.12
T2  - American Journal of Nano Research and Applications
JF  - American Journal of Nano Research and Applications
JO  - American Journal of Nano Research and Applications
SP  - 70
EP  - 73
PB  - Science Publishing Group
SN  - 2575-3738
UR  - https://doi.org/10.11648/j.nano.20130103.12
AB  - In the course of technological operations and the following running, the aluminum nanolayer providing reliable unglue bonding the ZERODUR parts demonstrates a complex of previously unknown properties: - compensation of small geometrical deviations in joined parts, due to aluminum plasticity the requirements to geometry of joined parts can be lowered from Ν = 0.5, ΔΝ = 0.1 (where Ν is the deviation of surface geometry from standard expressed in the Newton interferential rings, ΔΝ – local error or deviation of the type “well” or “nib”), which are necessary for joining, if one applies the methods of optical contact or deep optical contact, to Ν = 2-5, ΔΝ = 1; - Chemical interaction with polished ZERODUR surface at relatively low temperatures (400 to 600ºС); - Minimum level of internal mechanical strains in joined parts; - Properties of elastically-brittle durable material. Using the above generalization of the obtained results, we have offered new technological schemes for production of ZERODUR parts with a complex shape.
VL  - 1
IS  - 3
ER  -

Copy | Download