The propagation characteristics of Lamb waves in carbon fiber reinforced plastics with low velocity impact (LVI) damage were investigated by numerical simulation. In order to accurately simulate lamb response to the multiple types of damage, a three-dimension finite element model was built. First, various types of damages were obtained by low velocity impact with variety of impact energy on composite plates. Then, Lamb waves are loaded into the composite plate with multiple damages Four sensors are arranged in a diamond shape with the damage as the center. One sensor sends Lamb wave and the other three receive Lamb wave signal to extract the signal containing damage information. Finally, the power spectrum density was introduced to characterize the relationship between lamb waves and damage. The results demonstrate that the evolution law of damage is consistent with the theory and the sensitivity of power spectrum density to damage was verified. This study provides a new in-depth research method for damage detection and analysis.
Published in | International Journal of Sensors and Sensor Networks (Volume 10, Issue 1) |
DOI | 10.11648/j.ijssn.20221001.12 |
Page(s) | 7-15 |
Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
Copyright |
Copyright © The Author(s), 2022. Published by Science Publishing Group |
Carbon Fiber Reinforced Plastics, Finite Element Analysis, Low Velocity Impact, Guide Wave
[1] | Wu J, Xu X, Liu C, et al. Lamb wave-based damage detection of composite structures using deep convolutional neural network and continuous wavelet transform [J]. Composite Structures, 2021, 276 (3): 114590. |
[2] | Liu C, Yu J, Zhang B, et al. Analysis of Lamb wave propagation in a functionally graded piezoelectric small-scale plate based on the modified couple stress theory [J]. Composite Structures, 2021, 265 (2): 113733. |
[3] | Ding, Xiangyan, et al. “Experimental Investigation of the Surface Corrosion Damage in Plates Based on Nonlinear Lamb Wave Methods.” Ndt & E International, vol. 121, 2021, p. 102466. |
[4] | Lu S, Jiang M, Sui Q, et al. Damage identification system of CFRP using fiber Bragg grating sensors [J]. Composite Structures, 2015, 125: 400-406. |
[5] | Dionysopoulos D, Fierro G P M, Meo M, et al. Imaging of barely visible impact damage on a composite panel using nonlinear wave modulation thermography [J]. Ndt & E International, 2018, 95. |
[6] | Prade F, Schaff F, Senck S, et al. Nondestructive characterization of fiber orientation in short fiber reinforced polymer composites with X-ray vectorradiography [J]. Ndt & E International, 2016, 86. |
[7] | Park W H, Packo P, Kundu T. Acoustic source localization in an anisotropic plate without knowing its material properties – a new approach [J]. Ultrasonics, 2017, 9805: 98050J. |
[8] | Zhu Y, Zeng X, Deng M, et al. Detection of nonlinear Lamb wave using a PVDF comb transducer [J]. Ndt & E International, 2017, 93. |
[9] | Ochôa P, Fernandez Villegas I, Groves R M, et al. Experimental assessment of the influence of welding process parameters on Lamb wave transmission across ultrasonically welded thermoplastic composite joints [J]. Mechanical Systems & Signal Processing, 2018, 99: 197-218. |
[10] | Liu X, Bo L, Yang K, et al. Locating and imaging contact delamination based on chaotic detection of nonlinear Lamb waves [J]. Mechanical Systems & Signal Processing, 2018, 109: 58-73. |
[11] | Yang B, Xuan F Z, Chen S, et al. Damage localization and identification in WGF/epoxy composites by using Lamb waves: experiment and simulation [J]. Composite Structures, 2017, 165. |
[12] | Xu B, Yuan S, Wang M, et al. Determining impact induced damage by lamb wave mode extracted by EMD method [J]. Measurement, 2015, 65: 120-128. |
[13] | Pant S, Laliberte J, Martinez M, et al. Derivation and experimental validation of Lamb wave equations for an n -layered anisotropic composite laminate [J]. Composite Structures, 2014, 111 (11): 566-579. |
[14] | Yelve N P, Mitra M, Mujumdar P M. Detection of delamination in composites using Lamb wave based nonlinear method [J]. Composite Structures, 2017, 159: 257-266. |
[15] | Wang Z, Zhao J, Zhang X. Finite element analysis of composite laminates subjected to low-velocity impact based on multiple failure criteria [J]. Materials Research Express, 2018, 5 (6). |
[16] | Feng B, Ribeiro A L, Ramos H G. Interaction of Lamb waves with the edges of a delamination in CFRP composites and a reference-free localization method for delamination [J]. Measurement, 2017. |
[17] | Ng C T, Veidt M, Rose L R F, et al. Analytical and finite element prediction of Lamb wave scattering at delaminations in quasi-isotropic composites [J]. Journal of Sound & Vibration, 2012, 331 (22): 4870-4883. |
[18] | Stepinski T, Mańka M, Martowicz A. Interdigital Lamb Wave Transducers for Applications in Structural Health Monitoring [J]. Ndt & E International, 2016. |
[19] | Nayfeh AH. Wave propagation in layered anisotropic media with applications to composites. New York: Elsevier; 1995. |
[20] | He C, Liu H, Liu Z, et al. The propagation of coupled Lamb waves in multilayered arbitrary anisotropic composite laminates [J]. Journal of Sound & Vibration, 2013, 332 (26): 7243-7256. |
[21] | Pant S, Laliberte J, Martinez M, Rocha B. Derivation and experimental validation of Lamb wave equations for an n-layered anisotropic composite laminate. Compos Struct 2014; 111: 566–79. |
[22] | Hashin, Z. Failure Criteria for Unidirectional Fiber Composites [J]. Journal of Applied Mechanics, 1980, 47 (2): 329-334. |
[23] | Kim E H, Rim M S, Lee I, et al. Composite damage model based on continuum damage mechanics and low velocity impact analysis of composite plates [J]. Composite Structures, 2013, 95 (1): 123-134. |
[24] | Faggiani A, Falzon B G. Predicting low-velocity impact damage on a stiffened composite panel [J]. Composites Part A Applied Science & Manufacturing, 2010, 41 (6): 737-749. |
[25] | Pedram M, Esfandiari A, Khedmati M R. Damage detection by a FE model updating method using power spectral density: Numerical and experimental investigation [J]. Journal of Sound & Vibration, 2017, 397: 51-76. |
APA Style
Chenhui Su, Ting Wang, Wenchao Zhang, Hongcheng Cao, Yunqing Qu. (2022). Relationship Identification Between CFRP Impact Damage and Ultrasonic Guided Waves Using 3D Finite Element Simulation. International Journal of Sensors and Sensor Networks, 10(1), 7-15. https://doi.org/10.11648/j.ijssn.20221001.12
ACS Style
Chenhui Su; Ting Wang; Wenchao Zhang; Hongcheng Cao; Yunqing Qu. Relationship Identification Between CFRP Impact Damage and Ultrasonic Guided Waves Using 3D Finite Element Simulation. Int. J. Sens. Sens. Netw. 2022, 10(1), 7-15. doi: 10.11648/j.ijssn.20221001.12
@article{10.11648/j.ijssn.20221001.12, author = {Chenhui Su and Ting Wang and Wenchao Zhang and Hongcheng Cao and Yunqing Qu}, title = {Relationship Identification Between CFRP Impact Damage and Ultrasonic Guided Waves Using 3D Finite Element Simulation}, journal = {International Journal of Sensors and Sensor Networks}, volume = {10}, number = {1}, pages = {7-15}, doi = {10.11648/j.ijssn.20221001.12}, url = {https://doi.org/10.11648/j.ijssn.20221001.12}, eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijssn.20221001.12}, abstract = {The propagation characteristics of Lamb waves in carbon fiber reinforced plastics with low velocity impact (LVI) damage were investigated by numerical simulation. In order to accurately simulate lamb response to the multiple types of damage, a three-dimension finite element model was built. First, various types of damages were obtained by low velocity impact with variety of impact energy on composite plates. Then, Lamb waves are loaded into the composite plate with multiple damages Four sensors are arranged in a diamond shape with the damage as the center. One sensor sends Lamb wave and the other three receive Lamb wave signal to extract the signal containing damage information. Finally, the power spectrum density was introduced to characterize the relationship between lamb waves and damage. The results demonstrate that the evolution law of damage is consistent with the theory and the sensitivity of power spectrum density to damage was verified. This study provides a new in-depth research method for damage detection and analysis.}, year = {2022} }
TY - JOUR T1 - Relationship Identification Between CFRP Impact Damage and Ultrasonic Guided Waves Using 3D Finite Element Simulation AU - Chenhui Su AU - Ting Wang AU - Wenchao Zhang AU - Hongcheng Cao AU - Yunqing Qu Y1 - 2022/06/08 PY - 2022 N1 - https://doi.org/10.11648/j.ijssn.20221001.12 DO - 10.11648/j.ijssn.20221001.12 T2 - International Journal of Sensors and Sensor Networks JF - International Journal of Sensors and Sensor Networks JO - International Journal of Sensors and Sensor Networks SP - 7 EP - 15 PB - Science Publishing Group SN - 2329-1788 UR - https://doi.org/10.11648/j.ijssn.20221001.12 AB - The propagation characteristics of Lamb waves in carbon fiber reinforced plastics with low velocity impact (LVI) damage were investigated by numerical simulation. In order to accurately simulate lamb response to the multiple types of damage, a three-dimension finite element model was built. First, various types of damages were obtained by low velocity impact with variety of impact energy on composite plates. Then, Lamb waves are loaded into the composite plate with multiple damages Four sensors are arranged in a diamond shape with the damage as the center. One sensor sends Lamb wave and the other three receive Lamb wave signal to extract the signal containing damage information. Finally, the power spectrum density was introduced to characterize the relationship between lamb waves and damage. The results demonstrate that the evolution law of damage is consistent with the theory and the sensitivity of power spectrum density to damage was verified. This study provides a new in-depth research method for damage detection and analysis. VL - 10 IS - 1 ER -